630 mm continuous galvanizing production line

Power transmission system configuration: ac frequency conversion speed regulation

Zinc layer thickness adjusting range: 40-200 - g / ㎡ (double) gas knife adjustment state of zinc layer: normal zinc flowers, no zinc, zinc passivation methods: dip coating passivation

Product quality standard: GB/T2518-2008

Production line direction: from right to left (from operation side view) equipment, process and equipment function narrating subject according to the technological process arrangement is as follows:

1, # 2 on the cart to # 1, 2, uncoiler, 1, 2 # uncoiling knife - 1, 2 # open-book pinch - hydraulic transverse shear - welding platform - 1 # tension machine

- entry loop - in # 1, 2 of single roll machine - 2 # tensioning machine - beating roller to annealing furnace, the furnace nose - zinc pot - sink roll - air knife - vertical air-cooled chiller - tower to roll - level - quenching tank to squeeze dry quenching water machine, 1 # double roller on the machine (CPC) to 3 # tensioning machine, pulling machine - 4 # tensioning machine - dip coating passivation to passivation drying machine, hot air drying - export loop - 2 # double roller on the machine (CPC) to 5 # tensioning machine, hydraulic horizontal shear to export pinch machine, reel (EPC) to discharge the car through the electronic control system, hydraulic system, pneumatic system and ancillary equipment to realize continuous operation.